DIY Mini-Florida

Lighting systems

See also: Indoor lighting for tropical plants

Safety is our primary concern. We have many years experience with high-power lighting systems to understand that these systems can be dangerous if used improperly. Please follow safety rules below.

• We sell only low power systems:
  a) they are ok for supplemental winter lighting
  b) we don't recommend to install 1000W systems without knowing how or using professional electrical service - they require cooling, special electrical wiring, etc.
  c) If you need high power system for "permanent" lighting, please contact us and we'll be happy to help
  
  
• We sell only UL listed system. UL requires that system with metal-halide lamps incorporate special tempered glass we provide. Please install this glass.
  
  
• We suggest to use these systems as supplemental light during winter. If you plan to build a "permanent" greenhouse, where you can keep tropical plants year around and even make them bloom and fruit, please contact us for more information.
  
  
• We don't list here high-power systems (above 400W) because they require special installation and cooling. We'd be glad to help you, should you decide to install such system!
  
  
• The sale of lighting equipment for an illegal purpose is illegal. If you mention of anything illegal verbal or written, we will be unable to continue transaction with you. Our specialty is tropical ornamentals only, so don't ask us for any "how to" advice on growing illegal substances.
  
  
• IMPORTANT: safety rules

HPS - high-pressure sodium lamps, MH - metal-halide lamps

Picture of fixture	Description	Power/Lamp
	Sun System V Econo Grow Mini System Completely assembled and easy to use system: White powder coated finish Spectral pebble reflective insert All systems are wired 120 volt 2 chrome "V" hooks included for hanging Mogul base socket Louvered for efficient cooling 6 foot grounded power cord Protective glass is included for MH fixture 250 or 400W MH or HPS bulb included 2 year Warranty	250W, HPS
		250W, MH
		400W, HPS
		400W, MH
	Sun System IV Micro Mini Light System 100 W This small light fixture is perfect for small areas SUN SYSTEM IV MICRO MINI LIGHT SYSTEM Features: Steel powder coated housing 6 foot grounded power cord Medium base socket Chrome wire mounting hangers 100W MH or HPS bulb included Protective glass is included for MH fixture 5 year Warranty	100W, MH
		100W, HPS

Safety rules:

• Metal Halide lamps emit ultraviolet radiation which is harmful to eyes and skin. Never look directly at the lamp
• Metal Halide discharge lamps should only be used in enclosed fixtures with ultraviolet absorbing filter glass. Failure to do so may cause serious skin burn and eye damage.
• Do not use these lamps in fixtures where any unfiltered light is emitted from the fixture. Do not operate these lamps if the ultraviolet absorbing filter glass is broken or not installed.
• Metal Halide discharge lamps should only be operated in an enclosed fixture that safely contains all lamp parts in the event of a lamp burst or rupture. These lamps operate at a high internal pressure and at high temperatures. A lamp burst may occur causing physical injury and property damage.
• Lamps should never be operated beyond their rated useful life. The risk of a lamp burst increases with lamp age, temperature, improper operation, and improper handling.
• Never bump, drop, apply excessive stress, or scratch the lamp. This could cause the lamp to burst! Do not operate any lamps with any traces of scratches, cracks, or physical damage.
• Never operate a lamp above or below its rated current or voltage. This may cause the lamp to leak or burst.
• Always turn off the electrical power before inserting, removing, or cleaning the lamp.
• When installing never touch lamp with your bare hands.
• Clean any dirt, oil, or lint away from the lamp with alcohol and a lint free cloth or tissue.
• Electrical connections should be clean and in good condition. Replace lamp holders and sockets when needed. Affix the lamp securely in the socket. Improper installations will cause electrical arcing, overheating, and short life to lamp and socket.
• Never touch the lamp when it is on or soon after it has been turned off, as it is hot and will cause serious burns. Lamps should be allowed to cool for a minimum of ten (10) minutes after the lamp is turned off.
• Do not use lamp in close proximity to paper, cloth or other combustible material that can cause a fire hazard.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• Metal Halide discharge lamps contain mercury. Please refer to your local environment laws regarding disposal and recycling of mercury containing lamps. For more information, please go to www.lamprecycle.org
• Use only proper lamps specified by the manufacturer
• Lighting fixture is source of exessive heat. Do not operate fixture in close proximity to combustible materials

Lamps available from our store
in garden supplies section